Filter Results By:
+
Search Within Filters
Category
Finish
Style
Option
Voltage
Glass Finish or Style
Glass Form
Number of Blades
Location Rating
Mount Type
Wattage
Smart Home
Brand
Height
to
Width
to
Length
to
Price
to Powered By
Item Description
The terminal block connects the COB LED tape light to (2) 60" 18AWG wires. Can be used as a power feed or jumper.
Cable Length: 60"
Compatible Tape Lights: NUTP14 & NUTP15
Item Description
The terminal block connects the COB LED tape light to (2) wires (18AWG max.). Can be used as a power feed or jumper.
Compatible Tape Lights: NUTP14 & NUTP15
Item Description
RF Controller is required for RGBW LED Tape Light or CCT LED Tape Light. Installs between the driver and the power line interconnector. The controller can be used to toggle between colors or changing modes. Requires RGBW or CCT Hand Held Remote (ordered separately)
Compatible Hand Held Remote:NATL-877
Compatible Tape Lights: NUTPCOB-RGBW & NUTP10
Item Description
Hand held remote is used to program RGBW or CCT tape light to certain color configurations. The remote can be used up to 90" from controller, must be in direct view. It can be used to control four controllers simultaneously
Compatible Controller: NATL-875
Key Selections: Brightness, colors, color changing – flash, strobe, fade and smooth fade, on/off
Batteries: 2 x AAA
Item Description
Surge Protector for 120V LED Tape Light. Recommended when installed outdoors or longer run lengths. Compatible with hardwire tape light only.
Compatible Tape Light:
NUTP13: 120V LED Tape Light, Hardwire only
Item Description
The 8" linking cable allows for the linking of any two CCT Tape Light runs in any direction.
Linking cables can be joined together for various lengths.
Linking cables can also be used to extend Power Cords.
Compatible: 24V CCT Color Tuning Tape Light
Item Description
The 3" linking cable allows for the linking of two Tape Light runs in any direction.
Compatible Tape Light: Standard Continuous Tape Light (NUTP71)
Item Description
The 12" linking cable allows for the linking of two Tape Light runs in any direction.
Compatible Tape Light: Continuous Hy-Brite (NUTP51) or Continuous High Output (NUTP81) Tape Light
Item Description
4' Shallow Channel to mount low voltage tape light on a surface.
Field cuttable
Aluminum extrusion
Surface mount installation
Included: Diffused lens and end caps
Length: 4' (field cuttable)
Finish: Black
Compatible Tape Lights:
NUTP5: 24V Hy-Brite LED Tape Light
NUTP8: 24V High Output LED Tape Light
NUTP9: 24V Side-Lit LED Tape Light
NUTP10: 24V CCT Color Tuning LED Tape Light
NUTP12: 24V Comfort Dim LED Tape Light
NUTP14: 24V COB High Output LED Tape Light
NUTP15: 24V COB Standard LED Tape Light
NUTPCOB-RGBW: 24V RGBW COB LED Tape Light
Item Description
The 3" linking cable allows for the linking of two Tape Light runs in any direction.
Compatible Tape Light: Continuous Hy-Brite (NUTP51) or High Output (NUTP81) Tape Light
Item Description
The 24" linking cable allows for the linking of two Tape Light runs in any direction.
Compatible Tape Light: Continuous Hy-Brite (NUTP51) or Continuous High Output (NUTP81) Tape Light
Item Description
Splits power line connector from LED drivers into two separate leads, requires power line cable.
Voltage: 12V or 24V
Length: 5"
Finish: White
Compatibility: 12V or 24V LED Drivers
Item Description
3" Power cord with DC connector for Continuous Hy-Brite tape (NUTP51) or High Output tape (NUTP81). Connects LED tape light to LED driver.
Item Description
The 18" interconnection cable allows for the linking of two Tape Light runs in any direction.
Interconnection cables can be joined together for various lengths.
Interconnection cables can also be used to extend Power Line Interconnectors.
Compatible: High Output Tape Light & Hy-Brite Tape Light
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site